仿生工程学报 ›› 2017, Vol. 14 ›› Issue (2): 356-368.doi: 10.1016/S1672-6529(16)60404-3

• 论文 • 上一篇    下一篇

Structure, Mechanical Behavior and Puncture Resistance of Grass Carp Scales

Peng Liu1, Deju Zhu1, Junwen Wang2, Tinh Quoc Bui3   

  1. 1. College of Civil Engineering, Hunan University, Changsha 410082, China
    2. College of Civil Engineering, Tongji University, Shanghai 200092, China
    3. Department of Civil and Environmental Engineering, Tokyo Institute of Technology, Tokyo 108-233, Japan
  • 收稿日期:2016-09-15 修回日期:2017-03-15 出版日期:2017-04-10 发布日期:2017-04-10
  • 通讯作者: Deju Zhu E-mail:dzhu@hnu.edu.cn
  • 作者简介:Peng Liu1, Deju Zhu1, Junwen Wang2, Tinh Quoc Bui3

Structure, Mechanical Behavior and Puncture Resistance of Grass Carp Scales

Peng Liu1, Deju Zhu1, Junwen Wang2, Tinh Quoc Bui3   

  1. 1. College of Civil Engineering, Hunan University, Changsha 410082, China
    2. College of Civil Engineering, Tongji University, Shanghai 200092, China
    3. Department of Civil and Environmental Engineering, Tokyo Institute of Technology, Tokyo 108-233, Japan
  • Received:2016-09-15 Revised:2017-03-15 Online:2017-04-10 Published:2017-04-10
  • Contact: Deju Zhu E-mail:dzhu@hnu.edu.cn
  • About author:Peng Liu1, Deju Zhu1, Junwen Wang2, Tinh Quoc Bui3

摘要: This work is conducted to investigate the hierarchical structure, mechanical behavior and fracture resistance of grass carp scales with different water contents (hydrated and dehydrated) and load conditions (uniaxial, biaxial and punch tests). The whole cross-section of scales is investigated, and it is found that the bony layer displays discontinuity and partly embeds in collagen layer. Four different locations are considered under both tensile and punch tests. The results of the uniaxial tensile test show a correlation between the failure mode and the distribution of surface morphology on scales. The biaxial test results show that there are minor differences in the tensile strength and the Young’ modulus compared with those of the uniaxial tests, but the ultimate strain is about 20% – 50%. Puncture tests are also conducted with different size of needles and different hardness silicon rubbers as substrate. The results show that the puncture force and deformation are dependent on the size of needle and the hardness of substrate. The failure pattern of scales is related to the water content. Radial cracks occur in the bony layer of hydrated scale, and the collagen fibers twist around the puncture site. However, the shear failure occurs in the bony layer of dehydrated scale.

关键词: grass carp scale, mechanical behavior, penetration resistance, biaxial test

Abstract: This work is conducted to investigate the hierarchical structure, mechanical behavior and fracture resistance of grass carp scales with different water contents (hydrated and dehydrated) and load conditions (uniaxial, biaxial and punch tests). The whole cross-section of scales is investigated, and it is found that the bony layer displays discontinuity and partly embeds in collagen layer. Four different locations are considered under both tensile and punch tests. The results of the uniaxial tensile test show a correlation between the failure mode and the distribution of surface morphology on scales. The biaxial test results show that there are minor differences in the tensile strength and the Young’ modulus compared with those of the uniaxial tests, but the ultimate strain is about 20% – 50%. Puncture tests are also conducted with different size of needles and different hardness silicon rubbers as substrate. The results show that the puncture force and deformation are dependent on the size of needle and the hardness of substrate. The failure pattern of scales is related to the water content. Radial cracks occur in the bony layer of hydrated scale, and the collagen fibers twist around the puncture site. However, the shear failure occurs in the bony layer of dehydrated scale.

Key words: penetration resistance, mechanical behavior, biaxial test, grass carp scale