Significantly Enhanced Actuation Performance of IPMC by Surfactant-Assisted Processable MWCNT/Nafion Composite

doi:10.1016/S1672-6529(13)60231-0

摘要/Abstract

关键词: ionic polymer metal composite, homogeneous, actuator, conductivity, cetyl trimethyl ammonium bromide, multi-walled carbon nanotube

Abstract:

The performance of Ionic Polymer Metal Composite (IPMC) actuator was significantly enhanced by incorporating sur-factant-assisted processable Multi-Walled Carbon Nanotubes (MWCNTs) into a Nafion solution. Cationic surfactant Cetyl Trimethyl Ammonium Bromide (CTAB) was employed to disperse MWCNTs in the Nafion matrix, forming a homogeneous and stable dispersion of nanotubes. The processing did not involve any strong acid treatment and thus effectively preserved the excellent electronic properties associated with MWCNT. The as-obtained MWCNT/Nafion-IPMC actuator was tested in terms of conductivity, bulk and surface morphology, blocking force and electric current. It was shown that the blocking force and the current of the new IPMC are 2.4 times and 1.67 times higher compared with a pure Nafion-based IPMC. Moreover, the MWCNT/IPMC performance is much better than previously reported Nafion-IPMC doped by acid-treated MWCNT. Such significantly improved performance should be attributed to the improvement of electrical property associated with the addition of MWCNTs without acid treatment.

Key words: ionic polymer metal composite, homogeneous, actuator, conductivity, cetyl trimethyl ammonium bromide, multi-walled carbon nanotube

Qingsong He, Min Yu, Dingshan Yu, Yan Ding, Zhendong Dai. [J]. J4, 2013, 10(3): 359-367.

Qingsong He, Min Yu, Dingshan Yu, Yan Ding, Zhendong Dai. Significantly Enhanced Actuation Performance of IPMC by Surfactant-Assisted Processable MWCNT/Nafion Composite[J]. J4, 2013, 10(3): 359-367.

参考文献

[1] Aliev A E, Oh J, Kozlov M E, Kuznetsov A A, Fang S, Fonseca A F, Ovalle R, Lima M D, Haque M H, Gartstein Y N, Zhang M, Zakhidov A A, Baughman R H. Giant-stroke, superelastic carbon nanotube aerogel muscles. Science, 2009, 323, 1575–1578.
[2] Lehmann W, Skupin H, Tolksdorf C, Gebhard E, Zentel R, Kruger P, Losche M, Kremer F. Giant lateral electrostriction in ferroelectric liquid-crystalline elastomers. Nature, 2001, 410, 447–450.
[3] Jung J H, Jeon J H, Sridhar V, Oh I K. Electro-active gra-phene – Nafion actuators. Carbon, 2011, 49, 1279–1289.
[4] Liu S, Liu Y, Cebeci H, Guzman de Villoria R, Lin J H, Wardle B L, Zhang Q M. High electromechanical response of ionic polymer actuators with controlled-morphology aligned carbon nanotube/nafion nanocomposite electrodes. Advanced Functional Materials, 2010, 20, 3266–3271.
[5] Gong Y Q, Fan J P, Tang C Y, Tsui C P. Numerical simula-tion of dynamic electro-mechanical response of ionic polymer-metal composites. Journal of Bionic Engineering, 2011, 8, 263–272.
[6] Chang L F, Chen H L, Zhu Z C, Li B. Manufacturing process and electrode properties of palladium-electroded ionic polymer-metal composite. Smart Materials and Structures, 2012, 21, 065018.
[7] Shahinpoor M, Kim K J. Ionic polymer-metal composites: I. Fundamentals. Smart Materials and Structures, 2001, 10, 819–833.
[8] Lee J W, Yoo Y T. Preparation and performance of IPMC actuators with electrospun Nafion® – MWNT composite electrodes. Sensors and Actuators B, 2011, 159, 103–111.
[9] Lee J W, Hong S M, Kim J, Koo C M. Novel sulfonated styrenic pentablock copolymer/silicate nanocomposite membranes with controlled ion channels and their IPMC transducers. Sensors and Actuators B, 2012, 162, 369–376.
[10] Kim K J, Shahinpoor M. A novel method of manufacturing three-dimensional ionic polymer-metal composites (IPMCs) biomimetic sensors, actuators and artificial muscles. Poly-mer, 2002, 43, 797–802.
[11] Park I S, Kim S M, Pugal D, Huang L M, Tam-Chang S W, Kim K J. Visualization of the cation migration in ionic polymer-metal composite under an electric field. Applied Physics Letters, 2010, 96, 043301.
[12] Kim K J, Shahinpoor M. Ionic polymer–metal composites: II. Manufacturing techniques. Smart Materials and Structures, 2003, 12, 65–79.
[13] Yeom S W, Oh I K. A biomimetic jellyfish robot based on ionic polymer metal composite actuators. Smart Materials and Structures, 2009, 18, 085002.
[14] Lee S G, Park H C, Pandita S D, Yoo Y. Performance im-provement of IPMC (ionic polymer metal composites) for a flapping actuator. International Journal of Control, Auto-mation, and Systems, 2006, 4, 748–755.
[15] Feng G H, Tsai J W. Micromachined optical fiber enclosed 4-electrode IPMC actuator with multidirectional control ability for biomedical application. Biomedical Microdevices, 2011, 13, 169–177.
[16] Yu M, He Q S, Yu D S, Zhang X Q, Ji A H, Zhang H, Guo C, Dai Z D. Efficient active actuation to imitate locomotion of gecko’s toes using an ionic polymer-metal composite ac-tuator enhanced by carbon nanotubes. Applied Physics Let-ters, 2012, 101, 163701.
[17] Levitsky I A, Kanelos P, Euler W B. Electromechanical actuation of composite material from carbon nanotubes and ionomeric polymer. Journal of Chemical Physics, 2004, 121, 1058–1065.
[18] Wang X L, Oh I K, Kim J B. Enhanced electromechanical performance of carbon nano-fiber reinforced sulfonated poly(styrene-b-[ethylene/butylene]-b-styrene) actuator. Composites Science and Technology, 2009, 69, 2098–2101.
[19] Frank S, Poncharal P, Wang Z L, de Heer W A. Carbon nanotube quantum resistors. Science, 1998, 280, 1744–1746.
[20] Dai C A, Hsiao C C, Weng S C, Kao A C, Liu C P, Tsai W B, Chen W S, Liu W M, Shih W P, Ma C C. A membrane ac-tuator based on an ionic polymer network and carbon nanotubes: The synergy of ionic transport and mechanical properties. Smart Materials and Structures, 2009, 18, 085016.
[21] Jung J Y, Oh I K. Novel nanocomposite actuator based on sulfonated poly(styrene-b-ethylene-co-butylene-b-styrene) polymer. Journal of Nanoscience and Nanotechnology, 2007, 7, 3740–3743.
[22] Lau K T. Interfacial bonding characteristics of nano-tube/polymer composites. Chemical Physics Letters, 2003, 370, 399–405.
[23] Lee D Y, Lee M H, Kim K J, Heo S, Kim B Y, Lee S J. Effect of multiwalled carbon nanotube (M-CNT) loading on M-CNT distribution behavior and the related electrome-chanical properties of the M-CNT dispersed ionomeric nanocomposites. Surface & Coatings Technology, 2005, 200, 1920–1925.
[24] Pamula E, Rouxhet P G. Bulk and surface chemical func-tionalities of type III PAN-based carbon fibres. Carbon, 2003, 41, 1905–1915.
[25] Shofner M L, Khabashesku V N, Barrera E V. Processing and mechanical properties of fluorinated single-wall carbon nanotube-polyethylene composites. Chemistry of Materials, 2006, 18, 906–913.
[26] Lian H Q, Qian W Z, Estevez L, Liu H L, Liu Y X, Jiang T, Wang K S, Guo W L, Giannelis E P. Enhanced actuation in functionalized carbon nanotube-Nafion composites. Sensors and Actuators B, 2011, 156, 187–193.
[27] Vaisman L, Marom G, Wanger H D. Dispersions of sur-face-modified carbon nanotubes in water-soluble and wa-ter-insoluble polymers. Advanced Functional Materials, 2006, 16, 357–363.
[28] Vaisman L, Wagner H D, Marom G. The role of surfactants in dispersion of carbon nanotubes. Advances in Colloid and Interface Science, 2006, 128–130, 37–46.
[29] He Q S, Yu M, Song L L, Ding H T, Zhang X Q, Dai Z D. Experimental study and model analysis of the performance of IPMC membranes with various thickness. Journal of Bionic Engineering, 2011, 8, 77–85.
[30] He Q S, Yu M, Li Y X, Ding Y, Guo D J, Dai Z D. Investi-gation of ionic polymer metal composite actuators loaded with various tetraethyl orthosilicate contents. Journal of Bionic Engineering, 2012, 9, 75–83.
[31] Yu M, Shen H, Dai Z D. Manufacture and performance of ionic polymer-metal composites. Journal of Bionic Engi-neering, 2007, 4, 143–149.
[32] Rausch J, Zhuang R C, Mader E. Surfactant assisted dis-persion of functionalized multi-walled carbon nanotubes in aqueous media. Composites Part A: Applied Science and Manufacturing, 2010, 41, 1038–1046.
[33] Jiang L Q, Gao L, Sun J. Production of aqueous colloidal dispersions of carbon nanotubes. Journal of Colloid and Interface Science, 2003, 260, 89–94.
[34] Dolle S, Lechner B D, Park J H, Schymura S, Lagerwall J P F, Scalia G. Utilizing the Krafft phenomenon to generate ideal micelle-free surfactant-stabilized nanoparticle suspensions. Angewandte Chemie – International Edition, 2012, 51, 3254–3257.
[35] Pradhan N R. Thermal Conductivity of Nanowires, Nano-tubes and Polymer – Nanotube Composites, PhD Thesis, Worcester Polytechnic Institute, Massachusetts, USA, 2005.
[36] Palmre V, Kim S J, Kim K J. Millimeter thick ionic polymer membrane-based IPMCs with bimetallic Pd-Pt electrodes. Proceedings of SPIE, 2011, 7976, 151–159.
[37] Bonomo C, Fortuna L, Giannone P, Graziani S. An electric circuit to model ionic polymer-metal composites as actuator. IEEE Transactions on Circuits and Systems I: Regular Pa-pers, 2006, 53, 338–350.
[38] Hilding J, Grulke E A, Zhang Z G, Lockwood F. Dispersion of carbon nanotubes in liquids. Journal of Dispersion Sci-ence and Technology, 2003, 24, 1–41.
[39] Garg A, Sinnott S B. Effect of chemical functionalization on the mechanical properties of carbon nanotubes. Chemical Physics Letters, 1998, 295, 273–278.
[40] Pradhan N R, Duan H, Liang J, Iannacchione G S. The specific heat and effective thermal conductivity of compos-ites containing single-wall and multi-wall carbon nanotubes. Nanotechonology, 2009, 20, 245705.