Journal of Bionic Engineering ›› 2023, Vol. 20 ›› Issue (5): 2164-2178.doi: 10.1007/s42235-023-00363-9

• • 上一篇    下一篇

Minimum‑Time and Minimum‑Jerk Gait Planning in Joint Space for Assistive Lower Limb Exoskeleton

Habib Mohamad1; Sadjaad Ozgoli1; Fadi Motawej2   

  1. 1 Department of Electrical and Computer Engineering, Tarbiat Modares University, Tehran 14117-13116, Iran  2 Department of Mechatronics Engineering, Tishreen University, Lattakia 0096341, Syria
  • 出版日期:2023-08-26 发布日期:2023-09-06
  • 通讯作者: Sadjaad Ozgoli E-mail:ozgoli@modares.ac.ir
  • 作者简介:Habib Mohamad1; Sadjaad Ozgoli1; Fadi Motawej2

Minimum‑Time and Minimum‑Jerk Gait Planning in Joint Space for Assistive Lower Limb Exoskeleton

Habib Mohamad1; Sadjaad Ozgoli1; Fadi Motawej2   

  1. 1 Department of Electrical and Computer Engineering, Tarbiat Modares University, Tehran 14117-13116, Iran  2 Department of Mechatronics Engineering, Tishreen University, Lattakia 0096341, Syria
  • Online:2023-08-26 Published:2023-09-06
  • Contact: Sadjaad Ozgoli E-mail:ozgoli@modares.ac.ir
  • About author:Habib Mohamad1; Sadjaad Ozgoli1; Fadi Motawej2

摘要: Assistive lower limb exoskeleton robot has been developed to help paraplegic patients walk again. A gait planning method of this robot must be able to plan a gait based on gait parameters, which can be changed during the stride according to human intention or walking conditions. The gait is usually planned in cartesian space, which has shortcomings such as singularities that may occur in inverse kinematics equations, and the angular velocity of the joints cannot be entered into the calculations. Therefore, it is vital to have a gait planning method in the joint space. In this paper, a minimum-time and minimum-jerk planner is proposed for the robot joints. To do so, a third-order system is defined, and the cost function is introduced to minimize the jerk of the joints throughout the stride. The minimum time required is calculated to keep the angular velocity trajectory within the range specified by the motor’s maximum speed. Boundary conditions of the joints are determined to secure backward balance and fulfill gait parameters. Finally, the proposed gait planning method is tested by its implementation on the Exoped? exoskeleton.

关键词:  , Bionic robot , · Gait planning , · Optimization , · Complete paraplegic , · Lower limb exoskeleton

Abstract: Assistive lower limb exoskeleton robot has been developed to help paraplegic patients walk again. A gait planning method of this robot must be able to plan a gait based on gait parameters, which can be changed during the stride according to human intention or walking conditions. The gait is usually planned in cartesian space, which has shortcomings such as singularities that may occur in inverse kinematics equations, and the angular velocity of the joints cannot be entered into the calculations. Therefore, it is vital to have a gait planning method in the joint space. In this paper, a minimum-time and minimum-jerk planner is proposed for the robot joints. To do so, a third-order system is defined, and the cost function is introduced to minimize the jerk of the joints throughout the stride. The minimum time required is calculated to keep the angular velocity trajectory within the range specified by the motor’s maximum speed. Boundary conditions of the joints are determined to secure backward balance and fulfill gait parameters. Finally, the proposed gait planning method is tested by its implementation on the Exoped? exoskeleton.

Key words:  , Bionic robot , · Gait planning , · Optimization , · Complete paraplegic , · Lower limb exoskeleton