Biomimetic Design and Optimal Swing of a Hexapod Robot Leg

doi:10.1016/S1672-6529(14)60017-2

Abstract

Abstract:

Biological inspiration has spawned a wealth of solutions to both mechanical design and control schemes in the efforts to develop agile legged machines. This paper presents a compliant leg mechanism for a small six-legged robot, HITCR-II, based on abstracted anatomy from insect legs. Kinematic structure, relative proportion of leg segment lengths and actuation system were analyzed in consideration of anatomical structure as well as muscle system of insect legs and desired mobility. A spring based passive compliance mechanism inspired by musculoskeletal structures of biological systems was integrated into distal segment of the leg to soften foot impact on touchdown. In addition, an efficient locomotion planner capable of generating natural movements for the legs during swing phase was proposed. The problem of leg swing was formulated as an optimal control procedure that satisfies a series of locomotion task terms while minimizing a biologically-based objective function, which was solved by a Gauss Pseudospectral Method (GPM) based numerical technique. We applied this swing generation algorithm to both a simulation platform and a robot prototype. Results show that the proposed leg structure and swing planner are able to successfully perform effective swing movements on rugged terrains.

Key words: biomimetic design, legged robot, optimal control, biological movement principle, Gauss pseudospectral method

Jie Chen, Yubin Liu, Jie Zhao, He Zhang, Hongzhe Jin. Biomimetic Design and Optimal Swing of a Hexapod Robot Leg[J].J4, 2014, 11(1): 26-35.

References

[1] Mahardika N, Viet N Q, Park H C. Effect of outer wing separation on lift and thrust generation in a flapping wing system. Bioinspiration & Biomimetics, 2011, 6, 036006.

[2] Viet N Q, Park H C. Design and demonstration of a lo-cust-like jumping mechanism for small-scale robots. Jour-nal of Bionic Engineering, 2012, 9, 271−281.

[3] Zhang W P, Hu T J, Chen J, Shen L C. BioDKM: Bio-inspired domain knowledge modeling method for hu-manoid delivery robots’ planning. Expert Systems with Ap-plications, 2012, 39, 663−672.

[4] Dai Z D, Sun J R. A biomimetic study of discontinu-ous-constraint metamorphic mechanism for gecko-like robot. Journal of Bionic Engineering, 2007, 4, 91−95.

[5] Li H K, Dai Z D, Shi A J, Zhang H, Sun J R. Angular ob-servation of joints of geckos moving on horizontal and ver-tical surfaces. Chinese Science Bulletin, 2009, 54, 592−598.

[6] Ren L, Jones R K, Howard D. Predictive modeling of human walking over a complete gait cycle. Journal of Biomechan-ics, 2007, 40, 1567−1574.

[7] Liu A, Howard D. Kinematic design of crab-like legged vehicles. Robotica, 2001, 19, 67−77.

[8] Li Y, Ahmed A, Sameoto D, Menon C. Abigaille II: Toward the development of a spider-inspired climbing robot. Ro-botica, 2012, 30, 79−89.

[9] Görner M, Wimböck T, Hirzinger G. The DLR crawler: Evaluation of gaits and control of an actively compliant six-legged walking robot. Industrial Robot: An International Journal, 2009, 36, 344−351.

[10] Lewinger W A, Quinn R D. Neurobiologically-based control system for an adaptively walking hexapod. Industrial Robot: An International Journal, 2011, 38, 258−263.

[11] Klaassen B, Linnemann R, Spenneberg D, Kirchner F. Biomimetic walking robot SCORPION: Control and mod-eling. Robotics and Autonomous Systems, 2002, 41, 69−76.

[12] Erden M S. Optimal protraction of a biologically inspired robot leg. Journal of Intelligent & Robotic Systems, 2011, 64, 301−322.

[13] Gullan P J, Cranston P S. The Insects: An Outline of Ento-mology, 3nd ed, Wiley-Blackwell, Oxford, USA, 2005, 21−84.

[14] Full R J, Ahn A N. Static forces and moments generated in the insect leg: Comparison of a three-dimensional mus-culo-skeletal computer model with experimental measure-ments. Journal of Experimental Biology, 1995, 198, 1285−1298.

[15] Kukillaya R P, Holmes P J. A hexapedal jointed-leg model for insect locomotion in the horizontal plane. Biological Cybernetics, 2007, 97, 379−395.

[16] Zhao J, Zhang H, Liu Y B, Yan J H, Zang X Z, Zhou Z W. Development of the hexapod robot HITCR-II for walking on unstructured terrain. Proceedings of 2012 IEEE Interna-tional Conference on Mechatronics and Automation, Chengdu, China, 2012, 14, 64−69.

[17] Sponberg S. Neuromechanical response of musculo-skeletal structures in cockroaches during rapid running on rough terrain. Journal of Experimental Biology, 2008, 211, 433−446.

[18] Full R J, Kubow T, Schmitt J, Holmes P, Koditschek D. Quantifying dynamic stability and maneuverability in legged locomotion. Integrative and Comparative Biology, 2002, 42, 149−157.

[19] Alexander R M. Energy-saving mechanisms in walking and running. Journal of Experimental Biology, 1991, 160, 55−69.

[20] Huang J J, Ge S R, Cao W. Kinematic analysis of single leg for bionic ant mine disaster relief robot. Coal Mine Ma-chinery, 2008, 1, 83−84.

[21] Shen T L. Robust Control of Robot, Tsinghua University Press, Beijing, China, 2000. (in Chinese)

[22] Alexander R M N. Optima for Animals, Princeton University Press, Princeton, USA, 1996.

[23] Alexander R M N. Principles of Animal Locomotion, Princeton University Press, Princeton, USA, 2002.

[24] Kyriakopoulos K J, Saridis G N. Minimum jerk path gen-eration. Proceedings of 1988 IEEE International Conference on Robotics and Automation, Philadelphia, USA, 1988, 14, 364−369.

[25] Flash T, Hogan N. The coordination of arm movements: an experimentally confirmed mathematical model. The Journal of Neuroscience, 1985, 5, 1688−1703.

[26] Simon D. The application of neural networks to optimal robot trajectory planning. Robotics and Autonomous Sys-tems, 1993, 11, 23−24.

[27] Huntington G T. Advancement and Analysis of a Gauss Pseudospectral Transcription for Optimal Control Problems, PhD Thesis, Massachusetts Institute of Technology, USA, 2007.

[28] Wang J, Gao F, Zhang Y. Adaptive compliance control of a hydraulic manipulator in free forging. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012, 226, 279−289.

Quick Search Adv. Search