Numerical Simulation of Dynamic Electro-Mechanical Response of Ionic Polymer-Metal Composites

Abstract

Abstract:

Ionic Polymer-Metal Composites (IPMC) is an emerging class of Electro-Active Polymer (EAP) materials. IPMC has attractive features, such as high sensitivity and light weight, which are useful for developing novel designs in the fields of bionic actuators, artificial muscles and dynamic sensors. A Finite Element (FE) model was developed for simulating the dynamic electro-mechanical response of an IPMC structure under an external voltage input. A lumped Resistor–Capacitor (RC) model was used to describe the voltage-to-current relationship of a Nafion IPMC film for the computation of electric field intensity. Moreover, the viscoelastic property of the IPMC film was considered in the model and the non-uniform bending behavior was also taken into account. Based on the proposed model and the assumption that the thicknesses of the two electrodes are the same and uniform, the optimal coating thickness of the IPMC electrode was determined. It was demonstrated that the dynamic electro-mechanical response of the IPMC structure can be predicted by the proposed FE model, and the simulation results were in good agreement with the experimental findings.

Key words: IPMC, electro-mechanical response, finite element method

Yaqi Gong??Jianping Fan??Chak-yin Tang??Chi-pong Tsui?. Numerical Simulation of Dynamic Electro-Mechanical Response of Ionic Polymer-Metal Composites[J].J4, 2011, 8(3): 263-273.

References

[1] Lee J H, Lee J H, Nam J D, Choi H, Jung K M, Jcon J W, Lee Y K, Kim K J, Tak Y S. Water uptake and migration effects of electroactive ion-exchange polymer metal composite (IPMC) actuator. Sensors and Actuators A, 2005, 118, 98–106.

[2] Shahinpoor M. Ionic polymer-conductor composites as biomimetic sensors, actuators and artificial muscle: A review. Electrochimica Acta, 2003, 48, 2343–2353.

[3] Lee D Y, Park I S, Lee M H, Kim K J, Heo S. Ionic polymer-metal composite bending actuator loaded with multi-walled carbon nanotubes. Sensors and Actutators A, 2007, 133, 117–127.

[4] Nguyen V K, Lee J W, Yoo Y T. Characteristics and performance of ionic polymer-metal composite actutators based on Nafion/layered silicate and Nafion/silica nanocomposites. Sensors and Actuators B, 2007, 120, 529–537.

[5] Tang C Y, Du F P, Tsui C P, Lau A K T, Tam H Y. Low cost fabrication of IPMC actuator for industrial design. Industrial Engineering Research – An International Journal of IE Theory and Application, 2006, 3, 30–39.

[6] Tadokoro S, Yamagami S, Takamori T. An actuator model of ICPF for robotic applications on the basis of physico-chemical hypotheses. Proceeding of IEEE International Conference on Robotics and Automation, San Francisco, CA, USA, 2000, 1340–1346.

[7] Tadokoro S, Fukuhara M, Maeba Y, Konyo M, Takamori T, Oguro K. A dynamic model of ICPF actuator considering ion-induced lateral strain for Molluskan robotics. Proceedings of the 2002 IEEE/RSJ International Conference on
Intelligent Robots and Systems, Lausanne, Switzeland, 2002, 2010–2017.

[8] Popovic S. Design of Electro-Sctive Polymer Gels as Actuator Materials, PhD Thesis, Department of Mechanical Engineering, University of Washington, Washington, USA, 2001.

[9] Toi Y, Kang S S. Finite element analysis of two-dimensional electrochemical-mechanical response of ionic conducting polymer-metal composite beams. Computers and Structures, 2005, 83, 2573–2583.

[10] Yoon W J, Reinhall P G, Seibel E J. Analysis of electro-active polymer bending, a component in a low cost ultrathin scanning endoscope. Sensors and Actuators A, 133, 2007, 506–517.

[11] Gong Y Q, Tang C Y, Tsui C P, Fan J P Modelling of ionic polymer-metal composites by a multi-field finite element method. International Journal of Mechanical Sciences, 2009, 51, 741–751.

[12] Bao X Q, Bar-Cohen Y, Lih S S. Measurements and macro models of ionomeric polymer-metal composites (IPMC). Proceedings of the SPIE Smart Structures and Materials Symposium, EAPAD Conference, San Diego, CA, 2002, 4695, 220–227.

[13] Yim W, Kim K J, Paquette J W, Kim D. Operation of ionic polymer-metal composites in water. Proceedings of SPIE, Smart Structures and Materials, Bellingham WA, 2005, 5759, 22–33.

[14] Paquette J W, Kim K J, Dam J D, Yim W. The behavior of ionic polymer-metal composites in a multi-layer configuration. Smart Materials and Structures, 2005, 14, 881–888.

[15] Newbury K M, Leo D J. Linear electromechanical model of ionic polymer transducers II: Experimental validation. Journal of Intelligent Material Systems and Structures, 2003, 14, 343–357.

[16] Newbury K M, Leo D J. Linear electromechanical model of ionic polymer transducers I: Model development. Journal of Intelligent Material Systems and Structures, 2003, 14, 333–342.

[17] Yagasaki K, Tamagawa H. Experimental estimate of viscoelastic properties for ionic polymer-metal composites. Physical Review E, 2004, 70, 052801.

[18] Pugal D, Kim K J, Punning A, Kasemägi H, Kruusmaa M, Aabloo A. A self-oscillating ionic polymer-metal composite bending actuator. Journal of Applied Physics, 2008, 103, 084908.

[19] Thomas R E, Rosa A J. The Analysis and Design of Linear Circuits, Prentice Hall, NJ, USA, 1998.

[20] Wesselingh, J A, Krishna R. Mass Transfer in Multicomponent Mixtures, Delft University Press, Delft, The Netherlands, 2000.

[21] Fick A. Ueber diffusion. Poggendorff’s Annalen der Physik und Chemie, 1855, 94, 59–86. (in German)

[22] Haddad Y M. Viscoelasticity of Engineering Materials, Chapman & Hall, London, UK, 1995.

[23] Finlayson B A. The Method of Weighted Residuals and Variational Principles, Academic Press, New York, USA, 1972.

[24] Smith I M, Griffiths D V. Programming the Finite Element Method, 3rd ed, John Wiley & Sons Inc, New York, USA, 1998.

[25] Paquette J W, Kim K J, Dam J D, Tak Y S. An equivalent circuit model for ionic polymer-metal composites and their performance improvement by a clay-based polymer nano-composite technique. Journal of Intelligent Material Systems and Structures, 2003, 14, 633–642.

[26] Onishi K, Sewa S, Asaka K, Fujiwara N, Oguro K. Morphology of electrodes and bending response of the polymer electrolyte actuator. Electrochimica Acta, 2000, 46, 737–743.

Anton M, Aabloo A, Punning A, Kruusmaa M. A mechanical model of a non-uniform ionomeric polymer metal composite actuator. Smart Materials and Structures, 2008, 17, 1–10.

Quick Search Adv. Search