J4 ›› 2009, Vol. 6 ›› Issue (3): 239-245.

• 论文 • 上一篇    下一篇

The Methodology of Probe Design with Better Resolution and Less Resistive Donut Probe to Achieve the Best Performance

Mohammad Ismail Talukder1, Pepe Siy1, Gregory Auner1, Jinsheng Zhang2   

  1. 1. Department of Electrical and Computer Engineering, Wayne State University, MI 48202, USA
    2. Department of Otolaryngology, Wayne State University, MI 48201, USA
  • 出版日期:2009-09-30
  • 通讯作者: Mohammad Ismail Talukder E-mail: mitalukder@gmail.com E-mail:mitalukder@gmail.com

The Methodology of Probe Design with Better Resolution and Less Resistive Donut Probe to Achieve the Best Performance

Mohammad Ismail Talukder1, Pepe Siy1, Gregory Auner1, Jinsheng Zhang2   

  1. 1. Department of Electrical and Computer Engineering, Wayne State University, MI 48202, USA
    2. Department of Otolaryngology, Wayne State University, MI 48201, USA
  • Online:2009-09-30
  • Contact: Mohammad Ismail Talukder E-mail: mitalukder@gmail.com E-mail:mitalukder@gmail.com

摘要:

Probes are the interface between microsystems and bio-cells. The ideal interface is one-to-one interface. Though various research groups have been able to establish some sort of interfaces after many years of research, they are very crude. Neurons are millions in numbers, whereas the prostheses successfully built so far have only a few hundred probes at best. Creating an ef-fective interface is still far away. Though we have micro- and nano-technologies, we couldn’t build a prosthesis with an effective resolution. Main reasons behind it are the type of probe being used and the poor design of the probe. To address this problem, we developed a methodology to design a probe and an array of probes with better resolution and less resistive donut probe. This methodology helps us to design a probe optimizing all the parameters. We presented our methodology through a design that is capable of 70 μm penetration inside the tissue. The tissue heating by our designed probe is only 0.411 ?C. We also characterized the donut probe, which could be used by any research group to design a donut probe of their specific need.

关键词: donut probe, resolution, methodology, retina, prosthesis, probe design

Abstract:

Probes are the interface between microsystems and bio-cells. The ideal interface is one-to-one interface. Though various research groups have been able to establish some sort of interfaces after many years of research, they are very crude. Neurons are millions in numbers, whereas the prostheses successfully built so far have only a few hundred probes at best. Creating an ef-fective interface is still far away. Though we have micro- and nano-technologies, we couldn’t build a prosthesis with an effective resolution. Main reasons behind it are the type of probe being used and the poor design of the probe. To address this problem, we developed a methodology to design a probe and an array of probes with better resolution and less resistive donut probe. This methodology helps us to design a probe optimizing all the parameters. We presented our methodology through a design that is capable of 70 μm penetration inside the tissue. The tissue heating by our designed probe is only 0.411 ?C. We also characterized the donut probe, which could be used by any research group to design a donut probe of their specific need.

Key words: donut probe, resolution, methodology, retina, prosthesis, probe design