Design of a Biomimetic Skin for an Octopus-Inspired Robot-Part II: Development of the Skin Artefact

摘要/Abstract

摘要：

In order to develop skin artefact for an octopus-inspired robot arm, which is designed to be able to elongate 60% of its original length, silicone rubber and knitted nylon sheet were selected to manufacture an artificial skin, due to their higher elastic strain and high flexibility. Tensile and scissors cutting tests were conducted to characterise the matrix and reinforcing materials and the skin artefact. Material properties of the individual and the composite materials were compared with the measured properties of real octopus skin presented in Part I. The Young’s modulus of the skin should be below 20 MPa and the elastic strain range should be over 60%. The fracture toughness should be at least 0.9 kJ·m−2. Tubes made of the skin artefact filled with liquid were tested to study volume change under deformation. Finite element analysis model was developed to simulate the material and arm structure under tensile loading. Results show that the skin artefact developed has similar mechanical properties as the real octopus skin and satisfies all the design specifications of the OCTOPUS robot.

关键词: octopus skin, static tensile test, toughness, skin artefact, nylon/silicone composite

Abstract:

Key words: octopus skin, static tensile test, toughness, skin artefact, nylon/silicone composite

Jinping Hou??Richard H. C. Bonser??George Jeronimidis?. Design of a Biomimetic Skin for an Octopus-Inspired Robot-Part II: Development of the Skin Artefact[J]. J4, 2011, 8(3): 297-304.

参考文献

[1] Hou J P, Bonser, R H C, Jeronimidis, G. Design of a Biomimetic Skin for an Octopus-Inspired Robot – Part I: Characterising Octopus Skin. Journal of Bionic Engineering, in press.

[2] Supp D M, Boyce S T. Engineered skin substitutes: practices and potentials. Clinics in Dermatology, 2005, 23, 403–412.

[3] Liu X H, Smith L A, Hu J, Ma P X. Biomimetic nanofibrous gelatin/apatite composite scaffolds for bone tissue engineering. Biomaterials, 2009, 30, 2252–2258.

[4] Mertsching H, Walles T, Hofmann M, Schanz J, Knapp W H. Engineering of a vascularized scaffold for artificial tissue and organ generation. Biomaterials, 2005, 26, 6610–6617.

[5] Kremer M, Lang E, Berger A C. Evaluation of dermal-epidermal skin equivalents (‘composite-skin’) of human keratinocytes in a collagen- glycosaminoglycan matrix (Integra TM Artificial Skin). British Journal of Plastic Surgery, 2000, 53, 459–465.

[6] Kang H W, Tabata Y, Ikada Y. Fabrication of porous gelatine scaffolds for tissue engineering. Biomaterials, 1999, 20, 1339–1344.

[7] Tampieri A, Sandri M, Landi E, Pressato D, Francioli S, Quarto R, Martin I. Design of graded biomimetic osteochondral composite scaffolds. Biomaterials, 2008, 29, 3539–3546.

[8] Hutmacher D W, Ng K W, Kaps C, Sittinger M, Kläring S. Elastic cartilage engineering using novel scaffold architectures in combination with a biomimetic cell carrier. Biomaterials, 2003, 24, 4445–4458.

[9] MacNeil S. Progress and opportunities for tissue-engineered skin. Nature, 2007, 445, 874–880.

[10] Stern R, McPherson M, Longaker M T. Histologic study of artificial skin used in the treatment of full-thickness thermal injury. Journal of Burn Care & Rehabilitation, 1990, 11, 7–13.

[11] Wainwright D, Madden M, Luterman A, Hunt J, Monafo W, Heimbach D, Kagan R, Sittig K, Dimick A, Herndon D. Clinical evaluation of an acellular allograft dermal matrix in full-thickness burns. Journal of Burn Care & Rehabilitation, 1996, 17, 124–136.

[12] Marston WA, Hanft J, Norwood P, Pollak R. The efficacy and safety of Dermagraft in improving the healing of chronic diabetic foot ulcers: results of a prospective randomized trial. Diabetes Care, 2003, 26, 1701–1705.

[13] Chen G, Sato T, Ohgushi H, Ushida T, Tateishi T, Tanaka J. Culturing of skin fibroblasts in a thin PLGA-collagen hybrid mesh. Biomaterials, 2005, 26, 2559–66.

[14] Powell H M, Boyce S T. Engineered human skin fabricated using electrospun collagen-PCL blends: Morphogenesis and mechanical properties. Tissue Engineering Part A, 2009, 15, 2177–87.

[15] Young C D, Wu J R, Tsou T L. High-strength ultra-thin and fibre-reinforced pHEMA artificial skin. Biomaterials, 1998, 19, 1745–1752.

[16] OCTOPUS D8.1. Biomechatronic Specifications of the Robotic Octopus,

http://www.octopusproject.eu/members_area/Members_area/Deliverables/WP8/OCTOPUS_D8.1.pdf, 2009.

[17] Lucas P W, Pereira B. Estimation of fracture toughness of leaves. Functional Ecology, 1990, 4, 819–822.

[18] Choong M F, Lucas P W, Ong J S Y, Pereira B, Tan T W, Turner I M. Leaf fracture toughness and sclerophylly-their correlations and ecological implications. New Phytologist, 1992, 121, 597–610.

[19] Bonser R H C, Saker L, Jeronimidis G. Toughness anisotropy in feather keratin. Journal of Materials Science, 2004, 39, 2895–2896.

[20] Atkins A G, Xu X. Slicing of soft flexible solids. Journal of Mechanical Sciences, 2005, 47, 479–492.

[21] Vincent J F V. Fracture in Biomechanics Materials-A Practical Approach, IRL Press, Oxford, UK, 1992.

Kier W M, Smith K K. Tongues, tentacle and trunks: the biomechanics of movement in muscular-hydrostats. Zoological Journal of the Linnean Society, 1985, 83,307–324.