J4 ›› 2014, Vol. 11 ›› Issue (4): 600-609.doi: 10.1016/S1672-6529(14)60071-8

• 论文 • 上一篇    下一篇

Biomimetic Collagen/Hydroxyapatite Composite Scaffolds: Fabrication and Characterizations

Jiancang Wang1, Chaozong Liu2   

  1. 1. Department of Ophthalmology, Children’s Hospital of Hebei Province, Shijiazhuang 050031, P. R. China
    2. John Scales Centre for Biomedical Engineering, Institute of Orthopaedics and Musculoskeletal Science, University College London, Royal National Orthopaedic Hospital, Stanmore, London HA7 4LP, UK
  • 出版日期:2014-09-30
  • 通讯作者: Chaozong Liu E-mail:Chaozong.Liu@ucl.ac.uk

Biomimetic Collagen/Hydroxyapatite Composite Scaffolds: Fabrication and Characterizations

Jiancang Wang1, Chaozong Liu2   

  1. 1. Department of Ophthalmology, Children’s Hospital of Hebei Province, Shijiazhuang 050031, P. R. China
    2. John Scales Centre for Biomedical Engineering, Institute of Orthopaedics and Musculoskeletal Science, University College London, Royal National Orthopaedic Hospital, Stanmore, London HA7 4LP, UK
  • Online:2014-09-30
  • Contact: Chaozong Liu E-mail:Chaozong.Liu@ucl.ac.uk

摘要:

Biomimetic collagen/hydroxyapatite scaffolds have been prepared by microwave assisted co-titration of phosphorous acid-containing collagen solution and calcium hydroxide-containing solution. The resultant scaffolds have been characterised with respect to their mechanical properties, composition and microstructures. It was observed that the in situ precipitation process could combine collagen fibril formation and hydroxyapatite (HAp) formation in one process step. Collagen fibrils guided hydroxyapatite precipitation to form bone-mimic collagen/hydroxyapatite composite containing both intrafibrillar and interfibrillar hydroxyapatites. The mineral phase was determined as low crystalline calcium-deficient hydroxyapatite with calcium to phosphorus ratio (Ca/P) of 1.4. The obtained 1% (collagen/HAp = 75/25) scaffold has a porosity of 72%  and  a  mean pore  size of 69.4 µm. The incorporation of hydroxyapatite into collagen matrix improved the mechanical modulus of the scaffold significantly. This could be attributed to hydroxyapatite crystallites in collagen fibrils which restricted the deformation of the collagen fibril network, and the load transfer of the collagen to the higher modulus mineral component of the composite.

关键词: scaffold, bone tissue engineering, collagen, hydroxyapatite, biomimetic

Abstract:

Biomimetic collagen/hydroxyapatite scaffolds have been prepared by microwave assisted co-titration of phosphorous acid-containing collagen solution and calcium hydroxide-containing solution. The resultant scaffolds have been characterised with respect to their mechanical properties, composition and microstructures. It was observed that the in situ precipitation process could combine collagen fibril formation and hydroxyapatite (HAp) formation in one process step. Collagen fibrils guided hydroxyapatite precipitation to form bone-mimic collagen/hydroxyapatite composite containing both intrafibrillar and interfibrillar hydroxyapatites. The mineral phase was determined as low crystalline calcium-deficient hydroxyapatite with calcium to phosphorus ratio (Ca/P) of 1.4. The obtained 1% (collagen/HAp = 75/25) scaffold has a porosity of 72%  and  a  mean pore  size of 69.4 µm. The incorporation of hydroxyapatite into collagen matrix improved the mechanical modulus of the scaffold significantly. This could be attributed to hydroxyapatite crystallites in collagen fibrils which restricted the deformation of the collagen fibril network, and the load transfer of the collagen to the higher modulus mineral component of the composite.

Key words: scaffold, bone tissue engineering, collagen, hydroxyapatite, biomimetic