Journal of Bionic Engineering ›› 2024, Vol. 21 ›› Issue (1): 112-125.doi: 10.1007/s42235-023-00429-8
Simulating the GRF of Humanoid Robot Vertical Jumping Using a Simplifed Model with a Foot Structure for Foot Design
Chuanku Yi1; Xuechao Chen1,2; Yu Zhang1; Zhangguo Yu1,2; Haoxiang Qi1; Yaliang Liu1; Qiang Huang1,2
- 1 School of Mechatronical Engineering, Beijing Institute of Technology, Zizhuyaun, Haidian, Beijing 100081, China 2 Beijing Advanced Innovation Center for Intelligent Robots and Systems, Beijing Institute of Technology, Zizhuyuan, Haidian, Beijing 100081, China
Simulating the GRF of Humanoid Robot Vertical Jumping Using a Simplifed Model with a Foot Structure for Foot Design
Chuanku Yi1; Xuechao Chen1,2; Yu Zhang1; Zhangguo Yu1,2; Haoxiang Qi1; Yaliang Liu1; Qiang Huang1,2
- 1 School of Mechatronical Engineering, Beijing Institute of Technology, Zizhuyaun, Haidian, Beijing 100081, China 2 Beijing Advanced Innovation Center for Intelligent Robots and Systems, Beijing Institute of Technology, Zizhuyuan, Haidian, Beijing 100081, China
摘要： There are many theories and tools for human or robot motion simulation, but most of them require complex calculations. The LNZN model (a simplified model named by the proposers) simplifies the human model and facilitates simulation of the Ground Reaction Force (GRF) of body landing by spring damping model and ignoring joint rotation movements, which can reduce the amount of computation obviously. In this paper, the LNZN model of human running is selected as the basis and is modified to obtain the LNZN model of a robot, which expands the application of the LNZN model. According to the structure of the human foot, a foot structure is then added to the simplified model to reduce the GRF. We also applied driving forces to the new model to simulate the whole high jump motion of the robot to expand the functions of the LNZN model. The obtained GRF data were anastomotic to the actual experimental results. In addition, the effects of variables, such as the mass, hardness, and damping, of the foot on the GRF at the moment of landing were also explored. Finally, based on the guidelines obtained for the design of the robot’s foot structure, we fabricated new robot’s feet and installed them on the actual robot and achieved a better cushioning effect than the original foot in experiments.