Journal of Bionic Engineering ›› 2023, Vol. 20 ›› Issue (4): 1569-1584.doi: 10.1007/s42235-022-00327-5

• • 上一篇    下一篇

Optimal Synthesis of the Stephenson-II Linkage for Finger Exoskeleton Using Swarm-based Optimization Algorithms

Seyyed Mojtaba Varedi‑Koulaei1; Masoud Mohammadi1; Mohammad Amin Malek Mohammadi1; Mahdi Bamdad1,2   

  1. 1 Corrective Exercise and Rehabilitation Laboratory, Department of Mechanical Engineering, Shahrood University of Technology, Shahrood 3619995161, Iran  2 Department of Health Science and Technology, Aalborg University, 9220 Aalborg, Denmark
  • 出版日期:2023-07-10 发布日期:2023-07-10
  • 通讯作者: Mahdi Bamdad E-mail:mahdib@hst.aau.dk
  • 作者简介:Seyyed Mojtaba Varedi?Koulaei1; Masoud Mohammadi1; Mohammad Amin Malek Mohammadi1; Mahdi Bamdad1,2

Optimal Synthesis of the Stephenson-II Linkage for Finger Exoskeleton Using Swarm-based Optimization Algorithms

Seyyed Mojtaba Varedi‑Koulaei1; Masoud Mohammadi1; Mohammad Amin Malek Mohammadi1; Mahdi Bamdad1,2   

  1. 1 Corrective Exercise and Rehabilitation Laboratory, Department of Mechanical Engineering, Shahrood University of Technology, Shahrood 3619995161, Iran  2 Department of Health Science and Technology, Aalborg University, 9220 Aalborg, Denmark
  • Online:2023-07-10 Published:2023-07-10
  • Contact: Mahdi Bamdad E-mail:mahdib@hst.aau.dk
  • About author:Seyyed Mojtaba Varedi?Koulaei1; Masoud Mohammadi1; Mohammad Amin Malek Mohammadi1; Mahdi Bamdad1,2

摘要: Active exoskeletons have been widely investigated to supplement and restore human hand movements, but a significant limitation is that they have a complicated design requiring multi actuators. Single Degree-Of-Freedom (DOF) planar linkage mechanisms could be used with simple control. This research represents the design and optimization of a mechanism proposed for a finger exoskeleton bionic device. One DOF six-bar linkage Stephenson-II is selected, and a motion-generation mechanism synthesis problem is defined. The design is based on the data obtained from the flexion/extension motion of the index finger through 16 precision points and 16 angles for each phalange associated with the fingertip position. After explaining the kinematic analysis of the Stephenson-II, an evaluation of swarm intelligence techniques, including PSO, GWO, and ARO algorithms for solving optimization problems, is presented. ARO algorithm demonstrates the best performance among them. Moreover, the optimized mechanism in this study has a 50% error reduction compared to the one previously designed (Bataller et al. in Mech Mach Theory 105: 31–43, 2016).

关键词:  , Mechanism synthesis , · Bionic , · Finger exoskeleton , · PSO , · GWO , · ARO

Abstract: Active exoskeletons have been widely investigated to supplement and restore human hand movements, but a significant limitation is that they have a complicated design requiring multi actuators. Single Degree-Of-Freedom (DOF) planar linkage mechanisms could be used with simple control. This research represents the design and optimization of a mechanism proposed for a finger exoskeleton bionic device. One DOF six-bar linkage Stephenson-II is selected, and a motion-generation mechanism synthesis problem is defined. The design is based on the data obtained from the flexion/extension motion of the index finger through 16 precision points and 16 angles for each phalange associated with the fingertip position. After explaining the kinematic analysis of the Stephenson-II, an evaluation of swarm intelligence techniques, including PSO, GWO, and ARO algorithms for solving optimization problems, is presented. ARO algorithm demonstrates the best performance among them. Moreover, the optimized mechanism in this study has a 50% error reduction compared to the one previously designed (Bataller et al. in Mech Mach Theory 105: 31–43, 2016).

Key words:  , Mechanism synthesis , · Bionic , · Finger exoskeleton , · PSO , · GWO , · ARO