Quick Search Adv. Search

Journal of Bionic Engineering ›› 2024, Vol. 21 ›› Issue (4): 1847-1861.doi: 10.1007/s42235-024-00531-5

Previous Articles     Next Articles

Hierarchical Voronoi Structure Inspired by Cat Paw Pads Substantially Enhances Landing Impact Energy Dissipation

Da Lu1 ; Baoqing Pei1 ; Yangyang Xu1 ; Mengyuan Hu1 ; Shijia Zhang1 ; Le Zhang1 ; Xin Huang1 ; Yangwei Wang2 ; Xueqing Wu1,3   

  1. 1 Beijing Key Laboratory for Design and Evaluation Technology of Advanced Implantable & Interventional Medical Devices, Beijing Advanced Innovation Center for Biomedical Engineering, School of Biological Science and Medical Engineering, Beihang University, 100083 Beijing, China  2 National Key Laboratory of Science and Technology on Materials under Shock and Impact, Beijing Institute of Technology, 100081 Beijing, China  3 Shenzhen Institute of Beihang University, 518000 Shenzhen, China
  • Online:2024-07-15 Published:2024-09-01
  • Contact: Baoqing Pei; Xueqing Wu E-mail:pbq@buaa.edu.cn; xueqingwu@buaa.edu.cn
  • About author:Da?Lu1 ; Baoqing?Pei1 ; Yangyang?Xu1 ; Mengyuan?Hu1 ; Shijia?Zhang1 ; Le?Zhang1 ; Xin?Huang1 ; Yangwei?Wang2 ; Xueqing?Wu1,3

Abstract: When a human lands from a high drop, there is a high risk of serious injury to the lower limbs. On the other hand, cats can withstand jumps and falls from heights without being fatally wounded, largely due to their impact-resistant paw pads. The aim of the present study was to investigate the biomechanism of impact resistance in cat paw pads, propose an optimal hierarchical Voronoi structure inspired by the paw pads, and apply the structure to bionic cushioning shoes to reduce the impact force of landing for humans. The microstructure of cat paw pads was observed via tissue section staining, and a simulation model was reconstructed based on CT to verify and optimize the structural cushioning capacity. The distribution pattern, wall thickness of compartments, thickness ratio of epidermis and dermis, and number of compartments in the model were changed and simulated to achieve an optimal composed structure. A bionic sole was 3D-printed, and its performance was evaluated via compression test and a jumping-landing experiment. The results show that cat paw pads are a spherical cap structure, divided from the outside to the inside into the epidermis, dermis, and compartments, each with different cushioning capacities. A finite element simulation of different cushioning structures was conducted in a cylinder with a diameter of 20 mm and a height of 10 mm, featuring a three-layer structure. The optimal configuration of the three layers should have a uniform distribution with 0.3–0.5 mm wall thickness, a 1:1–2 thickness ratio of epidermis and dermis, and 100–150 compartments. A bionic sole with an optimized structure can reduce the peak impact force and delay the peak arrival time. Its energy absorption rate is about 4 times that of standard sole. When jumping 80, 100, and 120 cm, the normalized ground reaction force is also reduced by 8.7%, 12.6% and 15.1% compared with standard shoes. This study provides theoretical and technical support for effective protection against human lower limb landing injuries.

Key words: Cat paw pads · Hierarchical Voronoi structure · Landing impact · Energy dissipation · Bionic sole