J4 ›› 2015, Vol. 12 ›› Issue (3): 473-482.

• 论文 • 上一篇    下一篇

Biphasic Mechanical Properties of in vivo Repaired Cartilage

Qin Lian1, Cheng Chen1, Marie Chantal Uwayezu1, Weijie Zhang1, Weiguo Bian2,
Junzhong Wang1, Zhongmin Jin1,3   

  1. 1. State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710054, China
    2. Orthopaedics Department, First Affiliated Hospital, Xi’an Jiaotong University, Xi’an 710061, China
    3. Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds LS2 9JT, UK
  • 收稿日期:2014-10-13 修回日期:2015-06-13 出版日期:2015-09-30 发布日期:2015-07-10
  • 通讯作者: Qin Lian E-mail:lqiamt@mail.xjtu.edu.cn
  • 作者简介:Qin Lian1, Cheng Chen1, Marie Chantal Uwayezu1, Weijie Zhang1, Weiguo Bian2, Junzhong Wang1, Zhongmin Jin1,3

Qin Lian1, Cheng Chen1, Marie Chantal Uwayezu1, Weijie Zhang1, Weiguo Bian2,
Junzhong Wang1, Zhongmin Jin1,3   

  1. 1. State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710054, China
    2. Orthopaedics Department, First Affiliated Hospital, Xi’an Jiaotong University, Xi’an 710061, China
    3. Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds LS2 9JT, UK
  • Received:2014-10-13 Revised:2015-06-13 Online:2015-09-30 Published:2015-07-10
  • Contact: Qin Lian E-mail:lqiamt@mail.xjtu.edu.cn
  • About author:Qin Lian1, Cheng Chen1, Marie Chantal Uwayezu1, Weijie Zhang1, Weiguo Bian2, Junzhong Wang1, Zhongmin Jin1,3

摘要:

In the fast growing field of scaffold-based tissue engineering, improvement on the mechanical properties of newly formed tissues, e.g. the repaired cartilage, has always been one of the core issues. Studies on the correlations among scaffold compo-sition, in vivo morphological changes of the construct, and the finite deformation behaviors of new tissues (e.g. creep and stress-relaxation, and equilibrium response), have attracted increasing interests. In this paper, the correlations between the compressive biphasic mechanical properties (i.e., equilibrium elastic modulus E and permeability coefficient k) of 3D printing scaffold (consisting of collagen and β-tricalcium phosphate) and the proteoglycans (PGs) concentration of the repaired carti-lages after 24 weeks, 36 weeks and 52 weeks of scaffold implantation were investigated. Results indicated that the repaired cartilage covered the entire cartilage surface of large cylindrical osteochondral defects (10 mm in diameter × 15 mm in depth) on the canine trochlea grooves after 24 weeks. The equilibrium elastic modulus of the repaired cartilage reached 22.4% at 24 weeks, 70.3% at 36 weeks, and 93.4% at 52 weeks of the native cartilage, respectively. Meanwhile, the permeability coefficient decreased with time and at 52 weeks was still inferior to that of the native cartilage in one order of magnitude. In addition, the amount of glycosaminoglycans (GAGs) of repaired cartilage increased constantly with time, which at 52 weeks approached to nearly 60% of that of native cartilage. 3D printed scaffolds have potential applications in repairing large-scale cartilage defects.

关键词: biphasic mechanical properties, PGs, repaired cartilage, osteochondral scaffolds, 3D printing

Abstract:

In the fast growing field of scaffold-based tissue engineering, improvement on the mechanical properties of newly formed tissues, e.g. the repaired cartilage, has always been one of the core issues. Studies on the correlations among scaffold compo-sition, in vivo morphological changes of the construct, and the finite deformation behaviors of new tissues (e.g. creep and stress-relaxation, and equilibrium response), have attracted increasing interests. In this paper, the correlations between the compressive biphasic mechanical properties (i.e., equilibrium elastic modulus E and permeability coefficient k) of 3D printing scaffold (consisting of collagen and β-tricalcium phosphate) and the proteoglycans (PGs) concentration of the repaired carti-lages after 24 weeks, 36 weeks and 52 weeks of scaffold implantation were investigated. Results indicated that the repaired cartilage covered the entire cartilage surface of large cylindrical osteochondral defects (10 mm in diameter × 15 mm in depth) on the canine trochlea grooves after 24 weeks. The equilibrium elastic modulus of the repaired cartilage reached 22.4% at 24 weeks, 70.3% at 36 weeks, and 93.4% at 52 weeks of the native cartilage, respectively. Meanwhile, the permeability coefficient decreased with time and at 52 weeks was still inferior to that of the native cartilage in one order of magnitude. In addition, the amount of glycosaminoglycans (GAGs) of repaired cartilage increased constantly with time, which at 52 weeks approached to nearly 60% of that of native cartilage. 3D printed scaffolds have potential applications in repairing large-scale cartilage defects.

Key words: biphasic mechanical properties, PGs, repaired cartilage, osteochondral scaffolds, 3D printing