J4 ›› 2011, Vol. 8 ›› Issue (4): 375-386.doi: 10.1016/S1672-6529(11)60043-7
Dynamic Modeling, Testing, and Stability Analysis of an Ornithoptic Blimp
John Dietl1, Thomas Herrmann1, Gregory Reich2, Ephrahim Garcia1
- 1. Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, New York, USA
2. Air Force Research Laboratory, Wright-Patterson AFB, OH 45433-7542, USA
Dynamic Modeling, Testing, and Stability Analysis of an Ornithoptic Blimp
John Dietl1, Thomas Herrmann1, Gregory Reich2, Ephrahim Garcia1
- 1. Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, New York, USA
2. Air Force Research Laboratory, Wright-Patterson AFB, OH 45433-7542, USA
摘要：
In order to study ornithopter flight and to improve a dynamic model of flapping propulsion, a series of tests are conducted on a flapping-wing blimp. The blimp is designed and constructed from mylar plastic and balsa wood as a test platform for aerodynamics and flight dynamics. The blimp, 2.3 meters long and 420 gram mass, is propelled by its flapping wings. Due to buoyancy the wings have no lift requirement so that the distinction between lift and propulsion can be analyzed in a flight platform at low flight speeds. The blimp is tested using a Vicon motion tracking system and various initial conditions are tested including accelerating flight from standstill, decelerating from an initial speed higher than its steady state, and from its steady-state speed but disturbed in pitch angle. Test results are used to estimate parameters in a coupled quasi-steady aerodynamics/Newtonian flight dynamics model. This model is then analyzed using Floquet theory to determine local dynamic modes and stability. It is concluded that the dynamic model adequately describes the vehicle’s nonlinear behavior near the steady-state velocity and that the vehicle’s linearized modes are akin to those of a fixed-wing aircraft.