Journal of Bionic Engineering ›› 2022, Vol. 19 ›› Issue (5): 1229-1241.doi: 10.1007/s42235-022-00208-x

• • 上一篇    下一篇

Multi-material Bio-inspired Soft Octopus Robot for Underwater Synchronous Swimming

Faheem Ahmed1, Muhammad Waqas2,3, Bushra Shaikh2, Umair Khan2, Afaque Manzoor Soomro1,2,3, Suresh Kumar1, Hina Ashraf4, Fida Hussain Memon1, Kyung Hyun Choi1   

  1. 1 Department of Mechatronics Engineering, Jeju National University, Jeju 63243, South Korea  2 Department of Electrical Engineering, Sukkur IBA University, Airport Road, Sukkur 65200, Sindh, Pakistan  3 Advanced Micro Mechatronics and Energy Lab, Sukkur IBA University, Sukkur 65200, Pakistan 4 Department of Ocean Sciences, Jeju National University, Jeju 63243, South Korea
  • 收稿日期:2022-02-09 修回日期:2022-04-14 接受日期:2022-04-19 出版日期:2022-09-10 发布日期:2022-09-23
  • 通讯作者: Muhammad Waqas, Afaque Manzoor Soomro, Kyung Hyun Choi E-mail:mwaqas@iba-suk.edu.pk, afaquemanzoor@gmail.com, amm@jejunu.ac.kr
  • 作者简介:Faheem Ahmed1, Muhammad Waqas2,3, Bushra Shaikh2, Umair Khan2, Afaque Manzoor Soomro1,2,3, Suresh Kumar1, Hina Ashraf4, Fida Hussain Memon1, Kyung Hyun Choi1

Multi-material Bio-inspired Soft Octopus Robot for Underwater Synchronous Swimming

Faheem Ahmed1, Muhammad Waqas2,3, Bushra Shaikh2, Umair Khan2, Afaque Manzoor Soomro1,2,3, Suresh Kumar1, Hina Ashraf4, Fida Hussain Memon1, Kyung Hyun Choi1   

  1. 1 Department of Mechatronics Engineering, Jeju National University, Jeju 63243, South Korea  2 Department of Electrical Engineering, Sukkur IBA University, Airport Road, Sukkur 65200, Sindh, Pakistan  3 Advanced Micro Mechatronics and Energy Lab, Sukkur IBA University, Sukkur 65200, Pakistan 4 Department of Ocean Sciences, Jeju National University, Jeju 63243, South Korea
  • Received:2022-02-09 Revised:2022-04-14 Accepted:2022-04-19 Online:2022-09-10 Published:2022-09-23
  • Contact: Muhammad Waqas, Afaque Manzoor Soomro, Kyung Hyun Choi E-mail:mwaqas@iba-suk.edu.pk, afaquemanzoor@gmail.com, amm@jejunu.ac.kr
  • About author:Faheem Ahmed1, Muhammad Waqas2,3, Bushra Shaikh2, Umair Khan2, Afaque Manzoor Soomro1,2,3, Suresh Kumar1, Hina Ashraf4, Fida Hussain Memon1, Kyung Hyun Choi1

摘要: Inspired by the simple yet amazing morphology of the Octopus, we propose the design, fabrication, and characterization of multi-material bio-inspired soft Octopus robot (Octobot). 3D printed molds for tentacles and head were used. The tentacles of the Octobot were casted using Ecoflex-0030 while head was fabricated using relatively flexible material, i.e., OOMOO-25. The head is attached to the functionally responsive tentacles (each tentacle is of 79.12 mm length and 7 void space diameter), whereas Shape Memory Alloy (SMA) muscle wires of 0.5 mm thickness are used in Octobot tentacles for dual thrust generation and actuation of Octobot. The tentacles were separated in two groups and were synchronously actuated. Each tentacle of the developed Octobot contains a pair of SMA muscles (SMA-α and SMA-β). SMA-α muscles being the main actuator, was powered by 9 V, 350 mA power supply, whereas SMA-β was used to provide back thrust and thus helps to increase the actuation frequency. Simulation work of the proposed model was performed in the SolidWorks environment to verify the vertical velocity using the octopus tentacle actuation. The design morphology of Octobot was optimized using simulation and TRACKER software by analyzing the experimental data of angle, displacement, and velocity of real octopus. The as-developed Octobot can swim at variable frequencies (0.5–2 Hz) with the average speed of 25 mm/s (0.5 BLS). Therefore, the proposed soft Octopus robot showed an excellent capability of mimicking the gait pattern of its natural counterpart.

关键词: Bio-inspired , · Octopus , · Octobot , · Sub-surface , · Soft robotics , · Swimming

Abstract: Inspired by the simple yet amazing morphology of the Octopus, we propose the design, fabrication, and characterization of multi-material bio-inspired soft Octopus robot (Octobot). 3D printed molds for tentacles and head were used. The tentacles of the Octobot were casted using Ecoflex-0030 while head was fabricated using relatively flexible material, i.e., OOMOO-25. The head is attached to the functionally responsive tentacles (each tentacle is of 79.12 mm length and 7 void space diameter), whereas Shape Memory Alloy (SMA) muscle wires of 0.5 mm thickness are used in Octobot tentacles for dual thrust generation and actuation of Octobot. The tentacles were separated in two groups and were synchronously actuated. Each tentacle of the developed Octobot contains a pair of SMA muscles (SMA-α and SMA-β). SMA-α muscles being the main actuator, was powered by 9 V, 350 mA power supply, whereas SMA-β was used to provide back thrust and thus helps to increase the actuation frequency. Simulation work of the proposed model was performed in the SolidWorks environment to verify the vertical velocity using the octopus tentacle actuation. The design morphology of Octobot was optimized using simulation and TRACKER software by analyzing the experimental data of angle, displacement, and velocity of real octopus. The as-developed Octobot can swim at variable frequencies (0.5–2 Hz) with the average speed of 25 mm/s (0.5 BLS). Therefore, the proposed soft Octopus robot showed an excellent capability of mimicking the gait pattern of its natural counterpart.

Key words: Bio-inspired , · Octopus , · Octobot , · Sub-surface , · Soft robotics , · Swimming